What Materials Do Flat Packed Kitchen Suppliers in Oxley and Other Places Typically Use for Making New Cabinets?
If you were to visit the facility of any cabinetry supplier, you would inevitably come across a diverse range of cabinets. From wall-mounted cabinets to freestanding units, these suppliers would be able to provide any kind of cabinets that you might need. Many people prefer purchasing readymade cabinets to bespoke ones. This is primarily because readymade cabinets are easily available. So, you will not need to wait for the manufacturer to build them in order to use them.
Cabinet makers often rely on a diverse range of materials when it comes to making cabinets. This range of materials can be quite wide. This is especially so because cabinet makers typically use laminates, metals and fine woods for producing cabinets. However, some of the most common materials used for manufacturing cabinets nowadays include:
- Solid Wood: Solid wood comes in a diverse range of types – including oak, cherry and maple. Cabinets made of solid wood will be highly sturdy and robust. Naturally, this will make them relatively expensive as well. To make these cabinets more affordable, many cabinet makers offer cabinets featuring all-wood face frames and doors with plywood interiors. It is worth highlighting that solid wood cabinets can be susceptible to damage when exposed to extreme temperature levels.
- Wood Veneers: Many cut to measure cabinetry suppliers in Sherwood and other places make cabinets featuring wooden veneers. They obtain these veneers by peeling strips of wood off a tree. Thereafter, they will apply this veneer to plywood or a substrate base material to enhance its strength. In many cases, these veneers come into use for cabinet interiors and the side panels. This is especially so because veneers are relatively cheaper as opposed to solid wood. In addition, humidity and extreme temperatures do not affect veneers much either (as opposed to hardwoods). The use of wooden veneers also provides a more consistent graining pattern.
- Melamine: Melamine denotes a low-pressure laminate. It is a very affordable and durable material. But, it can be susceptible to chipping easily.
- Plastic Laminate: Although this material could warp over time, it is inexpensive, sturdy and easy to clean. It comes in an assortment of colours and patterns too. It usually features three layers i.e. a base layer of paper or plastic, a printed and coloured layer that could look like wood and a transparent protective layer. Cabinet makers apply heat and pressure to bond this to a substrate such as MDF, fibreboard or particleboard.
- Thermofoil: This denotes a vinyl film applied to a substrate with heat and pressure. Unlike laminates, it bears a closer semblance to solid wood. In addition, it is easy to maintain. More importantly, unlike painted cabinets, thermofoil cabinets will not chip easily.